#include <RCSwitch.h>
#include <FastLED.h>

#define LED_PIN 3
#define NUM_LEDS 9
#define STARLONG 5

int colorcode = 255 / STARLONG;

CRGB leds[NUM_LEDS + STARLONG];

RCSwitch mySwitch = RCSwitch();

//int Program = 0;
//int maxProgram = 2;
//int Num = 0;
//int Run = 0;
//int Program0Delay = 100;
//int Program1Delay = 100;
//int Program2Delay = 10;
//unsigned long DelayTime = 0;
//bool Active = false;

int anicolor = 255;
int anispeed = 50;

#define beyaz 1
#define farkli 0
boolean renk = farkli;

void setup() {
  FastLED.addLeds<WS2812, LED_PIN, GRB>(leds, NUM_LEDS);
  FastLED.setMaxPowerInVoltsAndMilliamps(12, 500);
  FastLED.clear();
  FastLED.show();
  //FastLED.addLeds<NEOPIXEL,3>(Strip1, Num_Strip1);
  Serial.begin(9600);
  mySwitch.enableReceive(0);  // Receiver on interrupt 0 => that is pin #2

}
//bu da renk ve hız ayarları
void editcolor()
{
  if (mySwitch.available())
  {

    unsigned long int num = mySwitch.getReceivedValue();
    Serial.println("Gelen Kod: " + String(num));
    Serial.print("Gelen Renk: ");
    switch (num)
    {
      case 9458954: mySwitch.disableReceive();//kırmızı
        Serial.println("kırmızı");
        anicolor = 255;
        renk = farkli;
        break;
      case 9458955: mySwitch.disableReceive();//yesil
        Serial.println("yesil");
        anicolor = 190;
        renk = farkli;
        break;
      case 9458956: mySwitch.disableReceive();//mavi
        Serial.println("mavi");
        anicolor = 90;
        renk = farkli;
        break;
      case 9458957: mySwitch.disableReceive(); //sarı
        Serial.println("sarı");
        anicolor = 210;
        renk = farkli;
        break;
      case 9458958: mySwitch.disableReceive(); //turuncu
        Serial.println("turuncu");
        anicolor = 210;
        renk = farkli;
        break;
      case 9458959: mySwitch.disableReceive(); //turuncu
        Serial.println("turuncu--2");
        anicolor = 230;
        renk = farkli;
        break;
      case 9458960: mySwitch.disableReceive(); //
        Serial.println("----1111");
        anicolor = 220;
        renk = farkli;
        break;
      case 9458961: mySwitch.disableReceive(); //mavi
        Serial.println("mavi");
        anicolor = 110;
        renk = farkli;
        break;
      case 9458962: mySwitch.disableReceive(); //
        Serial.println("----2222");
        anicolor = 130;
        renk = farkli;
        break;
      case 9458963: mySwitch.disableReceive(); //pembe
        Serial.println("pembe");
        anicolor = 75;
        renk = farkli;
        break;
      case 9458964: mySwitch.disableReceive(); //yesil
        Serial.println("yesil");
        renk = farkli;
        anicolor = 170;
        break;
      case 9458965: mySwitch.disableReceive(); //beyaz olmalı
        Serial.println("beyaz");
        //anicolor = 0;
        renk = beyaz;
        break;

      case 9458948: mySwitch.disableReceive();
        Serial.print("hız++: ");
        if (anispeed <= 500)
        {
          anispeed += 100;
        }
        Serial.println(anispeed);
        break;
      case 9458951: mySwitch.disableReceive();
        Serial.print("hız--: ");
        if (anispeed >= 150) //Burası 150 olmalı çünkü 50 olduğu zaman içine girerse yeni değer -50 olur
        {
          anispeed -= 100;
        }
        Serial.println(anispeed);
        break;

    }
    mySwitch.resetAvailable();
    mySwitch.enableReceive(0);
  }
}


void loop() {
  for (int w = 0; w <= 9; w++) 
  {
    if (renk == beyaz)
    {
      for (int s = 0; s <= STARLONG; s++) 
      {
        leds[w + s].setRGB(colorcode * s, colorcode * s, colorcode * s);
      }
    }
    else 
    {
      for (int s = 0; s <= STARLONG; s++) 
      {
        leds[s + w] = CHSV(anicolor, colorcode * s, colorcode * s);
      }
    }

    //delay(anispeed);
    unsigned long baslangic_sure = millis() + anispeed;//250;
    while (millis() <= baslangic_sure)
    {
      editcolor();
    }
    FastLED.show();
  }


  Serial.print("anispeed: ");
  Serial.println(anispeed);

  Serial.flush();

  unsigned long baslangic_sure1 = millis() + anispeed;
  while (millis() <= baslangic_sure1)
  {

    editcolor();
  }
}